We’ve completed Viscol-10A Automatic Kinematic Viscometer and Viscol-10J Cold Temperature Viscometer installations and trainings for total coverage of kinematic viscosity measurements from -30°C to 120°C. While Viscol-10A (on the left) is ideal for measurements up to 120C, Viscol-10J (on the right) offers sub-zero celcius viscosity measurements which is crucial for jet fuels and similar products. […]
Another Spectroil M Elemental Analyzer installation and trainings are completed. Providing fast and accurate results according to ASTM D6595 standard, Spectroil will serve to get quick and certain view of aircraft situation at site. Spectroil Elemental Analyzers deliver an early warning of abnormal wear and provides elemental information to determine the source of the problem […]
Viscol-10A Automatic Kinematic Viscometer installation and trainings are completed for pyrolysis oil quality control analysis. Being derived from the waste tires, kinematic viscosity values of the tire pyrolysis oil (TPO) samples will be measured full automatically by Viscol-10A System according to ASTM D445 and other relevant standards.
MicroLab 40 All-in-One Lubricant Analysis System is installed and set to go for in-service oil analysis to check lubricant quality and potential equipment failure for predictive and preventive maintenance operations. MicroLab 40 provides Elemental Analysis (Wear metals, additive levels), Contamination Detection (particle count, soot, glycol, dirt, water), Oil Chemistry (total Base Number, oxidation, nitration) and […]
We’ve completed installation and trainings of Pasol-10 Oxidation Stability Analyzer for ASTM D2272 oxidation tests and Vapol Universal Evaporator for Karl Fischer titration analysis. From oxygen purge to the end of the analysis, fully automated Pasol-10 Device, offers unattended operation of ASTM D2272 and D4742 oxidation analysis for fresh and in-service oil samples as well […]
We’ve successfully completed the installation and trainings of Lasernet Fines Wear Debris Analyzer for oil cleanliness and machinery condition monitoring according to ISO 4406, NAS 1638 (National Aerospace Standards), NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786 and HAL standards in single run. By direct imaging the particles in in-service oil samples, LaserNet Fines provides […]
We’ve completed installation and trainings of Viscol-10A Automatic Kinematic Viscometer for fresh and in-service transformer oil measurements at 40°C and 100°C. Autosampler embedded this fully automated viscometer offers ASTM D445 and ISO 3104 compliant nonstop kinematic viscosity measurements by carrying automatic cleaning cycles after each sample.
Another PetraMax EDXRF Multi-elemental Petroleum Analyzer installation and trainings are successfully completed. PetraMax offers ASTM D4294 compliant sulfur analysis in petroleum products in addition to 12 elements from P to Zn, for rapid monitoring of critical elements as Ca, Fe, K, Ni, and V at sub-ppm levels in single run.
We’ve completed installation and trainings of Viscol-10A Automatic Kinematic Viscometer for fresh lubricant measurements at 40°C and 100°C. This fully automated ASTM D445 compliant kinematic viscosity measurement device will help our user to overcome deviations between different operators while shortening analysis cycles and decreasing the use of cleaning solvents.
Spectroil 100 Series Elemental Analyzer is successfully installed and set to go for locomotive engine predictive maintenance operations. With rapid and accurate results according to ASTM D6595 standard this instrument will serve to get quick and certain view of equipment’s instant situation without any hassle. Spectroil Elemental Analyzers deliver an early warning of abnormal wear […]