- Home
- Products
- Petrochemistry
- Liquid Fuel
- InfraCal 2 ATR-B - Biodiesel In Diesel Analyzer
InfraCal 2 ATR-B – Biodiesel In Diesel Analyzer
Biodiesel Blend Analyzer for measuring percent biodiesel in diesel.
- General Details
The InfraCal 2 Biodiesel Blend Analyzer for measuring percent biodiesel in diesel is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive biodiesel blend analysis is needed. The InfraCal 2 ATR-B is based on proven IR technology, originally developed by Wilks, and used by fuel distributors, blenders, producers and regulatory agencies worldwide. The compact, easy-to-use Biodiesel Blend Analyzer has a measurement range of 0 – 100% biodiesel in diesel. These results are comparable to both ASTM D7371 and EN 14078, laboratory methods that require expensive FTIR Spectrometers.
Samples are applied to a zinc selenide attenuated total reflectance (ATR) sample plate for immediate results. The analysis can be done by non-technical personnel with no formal training and is ideal for lab or field use. The InfraCal2 ATR-B has a touch screen display, internal data storage and transfer, a multi-language interface and password protected settings. The internal battery pack allows for portability and up to 6 hours continuous use, providing results in under a minute at a fuel loading rack, in a laboratory or at a pump in a fueling station.
- Measurement range: 0 – 100% biodiesel
- Instrument repeatability: 0 – 30% +/- 0.2% ; 30-100% +/-1.0%
- Compares to ASTM D7371 & EN 14078
Benefits
Internal Data Storage Data storage including each measurement tagged with analyst, location and date/time information, and password protected instrument settings Export Directly to your PC via USB or a Flash Drive Touch Screen Display The touch screen display allows a simple set up for quick operation along with an easy calibration wizard. Internal Battery The internal battery pack allows for portability and up to 6 hours continuous use. Multi-Language Interface English, Spanish, French, Arabic Password Protected Settings Calibration and data are password protected to avoid accidental deletion No need for Installation/Commissioning The InfraCal 2 is a portable analyzer, weighing less than 5 lbs. with a 6 in. square foot print, requiring no installation or commissioning, little to no routine maintenance or recalibration. Minimal Consumables The analysis requires little to no consumables making the cost-per-test minimal. - Technical Info
Analytical Wavelength/Wave Number 5.7 µm, 1745 cm-1 Power Requirements 18 volts DC, 3.3 amps, internal battery pack Power Supply Universal AC/DC provided Weight 5.8 lb. (2.6 kg) with battery -7.0 lbs (3.2 kg) Dimensions (17 cm) x 7.8″ (19.8 cm) x 5.2″ (13.2 cm) Suggested Operating Range 5°C – 40°C Measurement Range 0 – 100% Biodiesel in Diesel Analysis Time Less than 30 seconds Instrument Repeatability 0 – 30%±0.2%, 20 – 100%±1% of biodiesel (FAME) concentration Communication Port USB, RS 232 - Standards
- ASTM D7371
- EN 14078
- Order Enquiry
- Documents
- Related Products
Sindie 7039 Sulfur Analyzer
Powered by MWDXRF technology, sulfur detection from ultra low sulfur diesel to crudes
NL200 Cold Filter Plugging Point (CFPP) Analyzer
Automatic cold filter plugging point (CFPP) analysis of diesel, biodiesel and heating fuels.