Contact us
‎+90 (312) 468 85 30
‎+90 (312) 468 85 33
  1. Home
  2. Products
  3. Petrochemistry
  4. Liquid Fuel
  5. InfraCal 2 ATR-E - Ethanol In Gasoline Analyzer

InfraCal 2 ATR-E – Ethanol In Gasoline Analyzer

Biodiesel Blend Analyzer for measuring percent biodiesel in diesel.

Categories: , , ,
  1. General Details

    The InfraCal 2 Ethanol Blend Analyzer for measuring percent ethanol in gasoline is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive ethanol blend analysis is needed.  The InfraCal 2 ATR-E is based on proven infrared (IR) technology, and used by fuel terminals, laboratories and regulatory agencies worldwide.  The compact, easy-to-use InfraCal 2 ATR-E has a measurement range of 0-20 & 70-98%% ethanol in gasoline and an accuracy of +/- 0.2%. These results are comparable to ASTM D4815.

    Samples are applied to a  zinc selenide attenuated total reflectance (ATR) sample plate and easily cleaned with a cloth & isopropyl alcohol.  No solvents requiring special ventilation, expensive waste disposal or difficult to clean cells are needed. The analysis can be done by non-technical personnel with no formal training and is ideal for lab or field use. The InfraCal2 ATR-E has a touch screen display, data storage and transfer, a multi-language interface and password protected settings.  The internal battery pack allows for portability and up to 12 hours continuous use, providing results in under a minute at a fuel loading rack, in a laboratory or at a pump in a fueling station.

    • Measurement range: 0 – 20 & 70 – 98% ethanol in gasoline
    • Instrument repeatability: +/- 0.2%
    • Compares to ASTM D4815
    Benefits
    Internal Data StorageData storage including each measurement tagged with analyst, location and date/time information, and password protected instrument settings
    ExportDirectly to your PC via USB or a Flash Drive
    Touch Screen DisplayThe touch screen display allows a simple set up for quick operation along with an easy calibration wizard.
    Internal BatteryThe internal battery pack allows for portability and up to 6 hours continuous use.
    Multi-Language InterfaceEnglish, Spanish, French, Arabic
    Password Protected SettingsCalibration and data are password protected to avoid accidental deletion
    No need for Installation/CommissioningThe InfraCal 2 is a portable analyzer, weighing less than 5 lbs. with a 6 in. square foot print, requiring no installation or commissioning, little to no routine maintenance or recalibration.
    Minimal ConsumablesThe analysis requires little to no consumables making the cost-per-test minimal.
  2. Technical Info
    Analytical Wavelength/Wave Number9.6 µm, 1045cm-1
    Power Requirements18 volts DC, 3.3 amps, internal battery pack
    Power SupplyUniversal AC/DC provided
    Weight5.8 lb. (2.6 kg) with battery -7.0 lbs (3.2 kg)
    Dimensions(17 cm) x 7.8″ (19.8 cm) x 5.2″ (13.2 cm)
    Suggested Operating Range5°C – 40°C
    Measurement Range0 – 20 & 70 – 98% ethanol in gasoline
    Analysis TimeLess than 30 seconds
    Instrument Repeatability0 – 20%±0.2%, 20 – 98%±1% of ethanol in petrol concentration
    Communication Port USB, RS 232
  3. Standards
    • ASTM D4815
  4. Order Enquiry
  5. Documents
  6. Related Products
    Sindie 7039 Sulfur Analyzer

    Powered by MWDXRF technology, sulfur detection from ultra low sulfur diesel to crudes

    Details
    NL200 Cold Filter Plugging Point (CFPP) Analyzer

    Automatic cold filter plugging point (CFPP) analysis of diesel, biodiesel and heating fuels.

    Details
    Kinematic Viscometer
    Viscol-10A Automatic Kinematic Viscometer

    Full automatic wide range kinematic viscometer

    Details