PD300 (D1160) Vacuum Distillation System

Automatic distillation system for atmospheric and vacuum distillation processes in accordance with ASTM D1160

  1. General Details

    Fully automatic crude oil distillation system, processor controlled according to ASTM D-1160  for the determination of boiling ranges of crude oil products under vacuum. The system can be operated in strict accordance to the ASTM procedure with 1 single receiver or alternatively, by using the automatic fraction collector, with 4 receivers.


    Key Features:

    • Parameter input, display as well as calculation of distillation and final data and print out of the distillation curve via PC
    • Easy operation due to userfriendly software, operated under WINDOWS XP
    • Sophisticated safety system
    • Automatic heating and distillation rate as well as detection of initial boiling point (ibp)
    • Individual distillation reports and curves can be re-called any time
    • Precise distillation data due to automatic calibration of volume measuring system
    • Anti foaming by foam breaker
    • Precise vacuum control
    • Automatic washing run
    • Calculation of charge according to receiver temperature and charge density
    • Easy installation effort as the system is delivered ready for operation
    • Manual override of automatic operation
    • Automatic controlled termination of distillation process and start of cooling
    • Automatic fraction collector with 4 receivers (Petrodist 300CC-F)

    The distillation is fully automatic from the initial boiling point to the pre-selected end boiling point or detected break-off.

    The Criteria For Break-Off Are:

    • The pre-selected final AET (atmospheric equivalent temperature) is reached
    • The maximum bath temperature is reached
    • The maximum flask temperature is reached
    • The pre-selected distillate volume is reached
    • The flask insert cracks
    • The distillate pressure drops
    • Product lack in the flask

    The distillation volume is measured automatically in receivers, temperature controlled by an IR-heater. The yield is calculated in percentage to the charge quantity. Distillation report, final data and distillation curve are printed out.

    There are manualsemi-automatic and full-atomatic models of Petrodist 300 Series. Fractional collecter is provided with 300CC-F model.

  2. Technical Info
    flask-sizeAvailable flask sizes500 mL
    flaskFlask charge200 mL
    temperaturOperating temperatureup to 400° C (750° F)
    temperaturFinal cut temperatureup to 650° C AET (1202° F)
    temperaturMax ambient temperature25° C
    pressureOperating pressurevacuum down to 1 Torr
    stromversorgungMains supply208 – 250 V, 50 Hz (60 Hz upon request)
    efficiencyPower consumption3500 W (without options)
    dimensionsDimensions (w x h x d)approx 0.65 x 0.64 x 0.96 m
  3. Standartlar
    • ASTM D1160
  4. Models
    • PD300M Manual
    • Manual heating control
    • Manual IBP Detection
    • Manual distillation rate control
    • Manual volume tracking
    • PD300S Semi-Auto
    • Automatic heating control
    • Automatic IBP Detection
    • Automatic distillation rate control
    • Semi-automatic volume tracking
    • PD300CC Full-Auto
    • Automatic heating control
    • Automatic IBP Detection
    • Automatic distillation rate control
    • Automatic volume tracking
  5. Order Enquiry
  6. Related Products