PD400S Semi-Automatic Combined Distillation System

Crude oil distillation system for semi-automatic operation according to ASTM D-2892 (TBP) & ASTM D-5236 (Potstill)

  1. General Details

    The PetroDist 400 S is a Combination System For Alternative Operation of The Following Systems:

    • PETRODIST 100 S
    • PETRODIST 200 S

    The central fraction collector is used for both PETRODIST 100 S as well as PETRODIST 200 S. The vacuum supply, the cryostat/ thermostat and the control station are also used for both systems. The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps.

    The cuts are taken automatically according to the pre-selected boiling temperature or when the receivers are filled up. The vacuum tight fraction collector contains 9 receivers.

    All necessary accessories will be supplied together with the system. The installation requires water, nitrogen, compressed air and electricity.


     

  2. Technical Info
      Equipment for ASTM D-2892 (PD100)
    flask-sizeAvailable flask sizes2, 4, 6, 10, 20 L
    pressureOperating pressurevacuum down to 1 Torr
    temperaturOperating temperatureup to 350° C (660° F)
    temperaturFinal cut temperatureup to 565° C AET (1050° F)
      Equipment for ASTM D-5236 (PD200)
    flask-sizeAvailable flask sizes2, 4, 6, 10, 20 L
    pressureOperating pressurevacuum down to 0.1 Torr
    temperaturOperating temperatureup to 400° C (750° F)
    temperaturFinal cut temperatureup to 565° C AET (1050° F)
      Common data
    diameterReceiver capacity12 x 500 ml
    temperaturMax ambient temperature25° C
    stromversorgungMains supply3 x 208 – 250 V, 50 Hz (60 Hz upon request)
    efficiencyPower consumption8000 W (without options)
    dimensionsDimensions (w x h x d)approx. 2.30 x 2,90 x 0.90 m
  3. Standards
    • ASTM D-2892 True Boiling Point – TBP
    • ASTM D-5236 Potstill
  4. Order Inquiry
  5. Related Products