We’ve completed Viscol-10A Automatic Kinematic Viscometer and Viscol-10J Cold Temperature Viscometer installations and trainings for total coverage of kinematic viscosity measurements from -30°C to 120°C. While Viscol-10A (on the left) is ideal for measurements up to 120C, Viscol-10J (on the right) offers sub-zero celcius viscosity measurements which is crucial for jet fuels and similar products. […]
Viscol-10A Automatic Kinematic Viscometer installation and trainings are completed for pyrolysis oil quality control analysis. Being derived from the waste tires, kinematic viscosity values of the tire pyrolysis oil (TPO) samples will be measured full automatically by Viscol-10A System according to ASTM D445 and other relevant standards.
We’ve successfully completed the installation and trainings of Lasernet Fines Wear Debris Analyzer for oil cleanliness and machinery condition monitoring according to ISO 4406, NAS 1638 (National Aerospace Standards), NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786 and HAL standards in single run. By direct imaging the particles in in-service oil samples, LaserNet Fines provides […]
We’ve completed installation and trainings of Viscol-10A Automatic Kinematic Viscometer for fresh lubricant measurements at 40°C and 100°C. This fully automated ASTM D445 compliant kinematic viscosity measurement device will help our user to overcome deviations between different operators while shortening analysis cycles and decreasing the use of cleaning solvents.
We’ve succesfully completed the installation and trainings of Viscol-10AS Automatic Kinematic Viscometer for measurements of fresh and in-service oil samples. Equipped with a wide-range (175 Fold) capillary and auto-sampling feature, the device will continuously measure kinematic viscosity of samples according to ASTM D445, ISO 3104 etc., with automatic washing cycles without any user intervention. […]
Kudos to our partners in Vietnam for this beautiful installation of Viscol-10AS Automatic Kinematic Viscometer for measurements of fresh and in-service oil samples. Equipped with a wide-range (175 Fold) capillary and autosampling unit, the device will serve 24/7 continous measurements according to ASTM D445, ISO 3104 etc., without any user intervention.
The Lasernet Fines Wear Debris Analyzer is successfully installed for machinery condition monitoring according to ISO 4406, NAS 1638, NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786 and HAL standards in single run. Beside the oil & fuel cleanliness, Lasernet Fines also provides advanced machinery conditioning monitoring by combining particle counts and codes, abnormal wear […]
We’ve successfully completed installation and user trainings of Clora Chlorine Analyzer for total chlorine level detection in petroleum fractions down to 0.07 ppm according to ASTM D4929 and ASTM D7536 standard test methods. Clora Analyzers are powered with monochromatic wavelength dispersion x-ray fluorescence (MWDXRF) technology which does not require gasses or high temperature process. With […]
We’re excited to start partnership with Ducom Instruments for general and lubricant tribology analysis systems including Four Ball Tester, High Frequency Reciprocating Rig (HFRR) and various types of automated tribology testing instruments. As being only authorized distributor for sales and after sales operations within Turkey, Iraq and Azerbaijan, we’ll deliver Ducom Instruments’ rugged, innovative and […]
With online support of our service team we’ve successfully completed the installation and user trainings of Viscol-10A Automatic Kinematic Viscometer for different range of petrochemical samples. Installed with a 175 Fold capillary viscometer, the device will serve measurements with wide range kinematic viscosities according to ASTM D445 / D446 standards full automatically.