Tag Archives: Particle Count

Microlab 40 All-In-One Oil Analyzer Installation

MicroLab 40 All-in-One Lubricant Analysis System is installed and set to go for in-service oil analysis to check lubricant quality and potential equipment failure for predictive and preventive maintenance operations. MicroLab 40 provides Elemental Analysis (Wear metals, additive levels), Contamination Detection (particle count, soot, glycol, dirt, water), Oil Chemistry (total Base Number, oxidation, nitration) and […]

Installation

LaserNet Wear Debris Analyzer For Turkish Aerospace

We’ve successfully completed the installation and trainings of Lasernet Fines Wear Debris Analyzer for oil cleanliness and machinery condition monitoring according to ISO 4406, NAS 1638 (National Aerospace Standards), NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786 and HAL standards in single run. By direct imaging the particles in in-service oil samples, LaserNet Fines provides […]

Installation

LaserNet Wear Debris Analyzer Installation

The Lasernet Fines Wear Debris Analyzer is successfully installed for machinery condition monitoring according to ISO 4406, NAS 1638, NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786 and HAL standards in single run. Beside the oil & fuel cleanliness, Lasernet Fines also provides advanced machinery conditioning monitoring by combining particle counts and codes, abnormal wear […]

Installation

In-Service Oil Analysis Training

We’ve successfully completed the kinematic viscosity, elemental detection, particle counting, water content, acidity and fuel dilution practical analysis techniques trainings for in-service oil samples. Users have been certified and ready to conduct used oil analysis with deep understanding of required actions to take incase of abnormal reports.

Training / Seminar

ML153 Comprehensive Oil Analysis System Installation

MiniLab 153, comprehensive oil analysis system is successfully set for particle count, ferrous content, kinematic viscosity, chemical and elemental detection at once, providing immediate actionable results on site.

Installation

Crude Oil Analyzers Installation

Viscol-10A Automatic Kinematic D445 viscosity VPVision vapor pressure and Clora total chlorine analyzers are successfully set for crude oil research applications.

Installation

Viscol-10P Polymer Viscometer Installation

Viscol-10P Automatic Viscometer is set for full automatic measurements of relative, specific, reduced, inherent and intrinsic viscosity values of polymer samples from -10°C to 140°C.

Installation

MicroLab Combined Oil Analysis System Installation

MicroLab all-in-one lubricant analysis system for comprehensive on-site analysis is set to check any potential equipment failure, degradation and contamination to enable immediate decision making. MicroLab offers completely automated oil analysis, cleaning and reporting, all with a push of a button.

Installation